Tips in Extracting Popcorn Ceiling


Removing Popcorn Ceiling is a fascinating project. It not only includes removing the old ceiling, but also involves rewiring the house so that a brand-new ceiling can be installed. But prior to you proceed with the job, you need to do the correct research study about the whole procedure so that you know what to expect. And in case you are not familiar with the removal of the popcorn ceiling, here is a step by step guide that will assist you.

When extracting popcorn ceiling, make certain that you use protective gloves and shatterproof glass, as they will safeguard you from any threat of injury when working. After picking the favored removal contractor, visit his office and make sure that everything is ready for the task. In addition to the devices, you will need to rent or buy a saw, screwdriver, hammer and other tools. Likewise, bring any heavy products with you to make certain that they too are safe throughout the removal.

There are two typical approaches of removing popcorn ceilings. The first one is to use drywall glue or tape to anchor it to the ceiling. The advantage of this method is that it requires little effort; nevertheless, the issue with it is that it might not totally extract the popcorn. Additionally, the drywall glue or tape is a bit untidy, which might make the entire task challenging.

The 2nd suggested way for removing popcorn ceiling is by utilizing drilling devices or heavy duty commercial trucks with cranes to remove them. In order to effectively extract it, make sure that Popcorn Ceiling Removal Austin - you extract all the lights and other heavy components present on the ceiling. In addition, remove all the tiles and lights present in the space. Remove any sort of decors to make it easier to access the screws or the jambs that can be extracted.

Scrapers are used for smoothing out the texture or finish on the walls and ceiling. It is best to utilize an old tooth brush or cotton swab as it allows scraping without damaging your floors or furnishings. Bear in mind that if there is any texture on the wall, make sure to smooth it out utilizing scraper. However, if you are planning to scrape without harming your surface areas, you can use the very same object for the function. Just wet the object, spread it on the wall and allow it to sink into the wall or flooring.

Utilize the fiber brush and scrape along the surface of the product. Ensure you use security gloves when using the asbestos scraper to prevent getting exposed to the compound. If the compound is exposed, it might trigger some health issue like shortness of breath, coughing, swelling of the lung tissue and other related diseases. When you have actually scraped enough, you must now be able to see the popcorn. Now that the popcorn is extracted, you can proceed to the painting job.

Before applying the paint, you require to take off all decorations on the ceilings. It is better to extract them before using the paint due to the fact that you will not need to sand them later on. The next step is to use a thin coat of paint on the ceiling utilizing the provided brush. This will cover the popcorn texture left on the ceilings.

For the 3rd and last action, position the textured ceiling panels on top of the old one and let it dry for a couple of hours. You can then go back to the light fixtures and replace the lights. Prior to installing the light fixtures on the ceilings, make sure that the panels are installed correctly so that there is a new layer of texture applied which the brand-new layer matches the texture of the ceiling completely.

Learn More:

Popcorn Ceiling Removal Austin

2882 Barton Skyway #239 A

Austin, TX 78746